13500

Adhesive Heat Barrier  Backed 12" x 12"

Retail Price: $11.51

Your Cost: $9.20

13575

Adhesive Heat Barrier  Backed 12" x 24"

Retail Price: $20.84

Your Cost: $16.68

13575-75

Adhesive Heat Barrier  Backed 12" x 50'

Retail Price: $521.22

Your Cost: $417.18

13585

Adhesive Heat Barrier  Backed 24" x 36" 

Retail Price: $930.24

Your Cost: $744.09

13590

Adhesive Heat Barrier  Backed 24" x 48" 

Retail Price: $74.43

Your Cost: $59.65

13590-50

Adhesive Heat Barrier  Backed 24" x 50'

Retail Price: $74.43

Your Cost: $59.65

The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000°F. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance. 

14001

Aluminized Heat Barrier 10 Square Feet

Retail Price: $87.85

Your Cost: $70.29

14001-50

Aluminized Heat Barrier 40" x 50'

Retail Price: $1,464.21

Your Cost: $1,171.47

The 40" X 36" Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000°F. This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec’s Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems.

13200

Battery Heat Barrier Kit 8" x 40"

Retail Price: $26.44

Your Cost: $21.15

World's Only Acid Neutralizing Heat Barrier Mat .Reflects Over 90 Percent of Radiant Heat. Traps and Neutralizes Battery Acid. Recyclable. Protects the Environment. Inexpensive Easy to Install. Completely Safe to Handle Before & During Installation. Protects against Corrosion. Used by all Branches of the U.S. Military. Available in Rolls, Mats, or Custom Sizes

13250 - Custom Cut Battery Wrap Heat Barrier Sizes 8" wide x ?" long.  The Minimum Order is 2 feet long.

14100

Cool-It-Mat 24" x 48"

Retail Price: $36.37

Your Cost: $29.09

14100-50

Cool-It-Mat 24" x 50 ft Roll

Retail Price: $454.68

Your Cost: $363.85

14110

Cool-It-Mat 48" x 48"

Retail Price: $72.76

Your Cost: $58.20

Use the COOL-IT MAT to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect for in doors, under hoods, and above transmission housings. The COOL-IT MAT is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly reflective Mylar reflects the heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.    

11031

Copper Exhaust Wrap 1' x 50'

Retail Price: $32.64

Your Cost: $26.11

11032

Copper Exhaust Wrap 2' x 50'

Retail Price: $54.38

Your Cost: $43.50

NEW!  Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by Thermo-Tec; improved Thermal-Conduction-Technology. Generation II Copper Exhaust Wrap creates more horsepower and reduces under-hood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000ºF, contains no asbestos.

11600

Clamp-On Heat Shield 1 FT.

Retail Price: $30.10

Your Cost: $19.58

11620

Clamp-On Heat Shield 2 FT.

Retail Price: $45.75

Your Cost: $29.76

11624

Clamp-On Heat Shield 2 FT. w/4" Clamps

Retail Price: $49.65

Your Cost: $32.29 For Trucks

11630

Clamp-On Heat Shield 3 FT.

Retail Price: $61.32

Your Cost: $39.95

11634

Clamp-On Heat Shield 3 FT. w/4" Clamps

Retail Price: $66.79

Your Cost: $43.43 For Trucks

The flexible clamp on heat shield blocks over 98% of the damaging radiant heat of the exhaust. The High-tech composite construction of the heat shield provides the ultimate in protection. The kits come complete with all clamps and install in minutes. Clamp-on shields are available in one, two and three foot lengths. Clamp-on shields incorporate Thermo-Tec’s proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. Can reduce intake temperatures by more than 30%. Includes Stainless Steel Clamps & is easy to install. Fits 1 1/8" - 3 1/8' pipes.

14500

Cool-It Air Tube Heat Shield

Retail Price: $52.43

Your Cost: $41.94

Keep your induction air cool with this unique lace up tube cover. The design of the cover allows it to fit from 2-1/2 inch to 4 inch air tubes up to 36 inches long. The lace on heat shield blocks over 98% of the radiant heat of the turbo and exhaust. The kit comes complete with four different color laces, blue, yellow, red and white. 

14260

Cool-It Plug Wire Sleeves - 4 Pack  (Silver)

Retail Price: $34.43

Your Cost: $29.00

14261

Cool-It Plug Wire Sleeves - 4 Pack  RED

Retail Price: $34.43

Your Cost: $29.00

14262

Cool-It Plug Wire Sleeves - 4 Pack  (BLACK)

Retail Price: $34.43

Your Cost: $27.00

14263

Cool-It Plug Wire Sleeves - 4 Pack  BLUE

Retail Price: $34.43

Your Cost: $29.00

14270

Cool-It Plug Wire Sleeves - 6 Pack  (Silver)

Retail Price: $51.64

Your Cost: $42.50

14271

Cool-It Plug Wire Sleeves - 6 Pack  RED

Retail Price: $51.64

Your Cost: $41.31

14272

Cool-It Plug Wire Sleeves - 6 Pack  (BLACK)

Retail Price: $51.64

Your Cost: $40.50

14273

Cool-It Plug Wire Sleeves - 6 Pack  BLUE

Retail Price: $51.64

Your Cost: $42.50

This unique spark plug and ignition wire protector comes in five sporty colors; red, orange, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products.

The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most important - is non-flammable.  Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6

16000

Fire-Proof Shifter Boot

Retail Price: $30.20

Your Cost: $24.16

FIRE-PROOF SHIFTER BOOT is made up of woven silica with a flexible MYLAR finish. The shifter boot was developed as a fire barrier for high speed engine fires. High speed fires can burn away rubber boots in seconds..  

11021

Graphite Black Wrap 1" x 1/16" x 50'

Retail Price: $32.95

Your Cost: $25.84

11022

Graphite Black Wrap 2" x 1/16" x 50'

Retail Price: $52.71

Your Cost: $36.44

11023

Graphite Black Wrap 2" x 1/16" x 100'

Retail Price: $102.12

Your Cost: $76.00

11153

Graphite Black Wrap 1" x 1/16" x 15'

Retail Price: $9.95

Your Cost: $7.96

11154

Graphite Black Wrap 2" x 1/16" x 15'

Retail Price: $15.76

Your Cost: $12.70

Graphite Black Wrap offers the same unrivaled performance and insulating properties as our original exhaust wrap, and more. Traditionally, high heat coating spray had to be applied to the exhaust wrap to color it black. Now NEW Graphite Black Wrap eliminates the process of coating the wrap with its patented (T-C-T) high heat color pigment. Graphite Black Wrap is available in one and two inch widths, in 50 foot rolls.

11001

Exhaust Insulating Wrap 1" x 1/16" x 50'

Retail Price: $29.67

Your Cost: $23.74

11002

Exhaust Insulating Wrap 2" x 1/16" x 50'

Retail Price: $49.44

Your Cost: $35.50

11003

Exhaust Insulating Wrap 2" x 1/16" x 100'

Retail Price: $99.89

Your Cost: $71.00

11006

Custom Cut Exhaust Wrap 6"x1/16"

Retail Price: $2.33

Your Cost: $2.12 Per Ft.

11151

Exhaust Insulating Wrap 1" x 1/16" x 15'

Retail Price: $8.89

Your Cost: $7.12

11152

Exhaust Wrap 2" x 1/16" x 15' (Short)

Retail Price: $14.82

Your Cost: $11.86

The original exhaust wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers with Header Wrap maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec header wrap will not over insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec, Thermal Conduction Technology (T-C-T) that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.

11006 – Custom Cut Exhaust Insulating Wrap is 6" wide x 1/16” thick and is custom cut to lengths of 10’ or more .  The Minimum Order is 10 feet.

11246

Exhaust Jacket 4 & 6 Cylinder. Kit

Retail Price: $80.05

Your Cost: $59.00

11248

Exhaust Jacket 8 Cylinder. Kit

Retail Price: $104.62

Your Cost: $74.67

The new QUICK WRAP High-Velocity Exhaust Jackets are a innovative way to insulate and block radiant heat. The jackets cover the tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This product is also uses Thermal Conduction Technology (T-C-T). This unique product can be applied with the headers in the vehicle.

Telephone Sales U.S.A. Only

Monday- Friday

8:00am - 5:00pm EST

1-800-300-6240

14800

Heavy Duty Mat Roller

Retail Price: $15.20

Your Cost: $12.99

Use MATT ROLLER to ensure the best adhesion of Thermo-Tec's Acoustical Mats. Removing air bubbles improves the sound dampening effect and prolongs the life of the Acoustical Mat.  (2" Wide Rubber Roller)

14003

(2) 20" x 24" Header Manifold Blanket

Retail Price: $94.16

Your Cost: 75.33

14004

(1) 36" x 40" Header Manifold Blanket

Retail Price: $88.52

Your Cost: $70.81

The Header Manifold Blanket provides excellent heat retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source. The aluminized side facing away, offering protection from abrasion and harmful liquid spills. The Header Manifold blanket is available in two sizes: (2) 20" by 24" blankets for V6 & V8 applications, and (1) 36" by 40" blanket for straight 6 & 4 cylinder engines..

11710

Micro-Louver Air Shield 12" x 24"

Retail Price: $35.55

Your Cost: $28.44

11720

Micro-Louver Air Shield 24" x 24"

Retail Price: $55.82

Your Cost: $44.66

11730

Micro-Louver Air Shield 48" x 24"

Retail Price: $101.34

Your Cost: $81.07

NEW! Lightweight yet durable, the aluminum Micro Louver Air Shield features micro air louvers, which allow air to flow through the metal shield. The movement of the vehicle creates dynamic air flow, cooling by natural convection. The textured surface created by the micro air louvers creates more area for heat dissipation. The Micro Louver Air Shield is flexible yet durable; it bends and flexes easily by hand, making a custom fit trouble-free.

12001

Hi-Heat Coating 11oz Can  (Black)

Retail Price: $10.08

Your Cost: $6.75

12002

Hi-Heat Coating 11oz Can  (Aluminum)

Retail Price: $10.48

Your Cost: $6.75

12003

Hi-Heat Coating 11oz Can  (Copper)

Retail Price: $12.24

Your Cost: $9.79

To finish off a clean and well protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface and help extend the life of wrap by protecting it from friction, and seals the pores to minimize the penetration of harmful liquids.

PLEASE NOTE  ~ Only Ships UPS Ground ~  Only Sold in the USA

16500

Muffler / Catalytic Converter Heat Shield Kit

Retail Price: $65.58

Your Cost: $59.00

The 40" X 24" MYLAR Heat Shield is made up of woven silica with a flexible MYLAR finish. The highly reflective heat shield can be installed between the catalytic converter or muffler or any other component to reflect radiant heat away from the undercarriage of the car. Kit includes all necessary fasteners.

14200

(2) Plug Wire Heat Shield 6" x 2.5"

Retail Price: $18.18

Your Cost: $14.55

14250

(4) Plug Wire Heat Shield 6" x 2.5"

Retail Price: $36.36

Your Cost: $29.00

The heat shield that offers the ultimate protection for spark plug wires and boots from conductive and radiant heat. The dual purpose sleeve has a surface that reflects over 90% of radiant heat while the inside silica based fabric prevents conductive heat from penetrating..

14150

Starter Heat Shield 7" x 22"

Retail Price: $28.76

Your Cost: $22.00

In today’s high heat environment, starters take in a lot of damaging heat that destroy the windings of the starter and solenoid. To combat this problem Thermo-Tec created a nonconductive strap on heat shield, with a highly reflective Mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters.

13101

V8-Snap Strap Kit (8) 9" Straps & (4) 18" Straps

Retail Price: $31.38

Your Cost: $25.11

13160

6 Pack Snap Strap Kit (6) 18" Straps

Retail Price: $18.65

Your Cost: $14.92

13160-2

2 Pack Snap Strap Kit (2) 18" Straps

Retail Price: $7.50

Your Cost: $6.50

The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap, and more. The high temperature stainless steel straps have a narrow profile to fit tight spots and they can be cut to the exact length needed. Secures with easy-to-use slide through fasteners.

Telephone Sales U.S.A. Only

Monday- Friday

8:00am - 5:00pm EST

1-800-300-6240

12005

Spray-On Adhesive 16oz

Retail Price: $14.14

Your Cost: $11.31

Thermo-Tec's new Heavy-Duty Spray Adhesive is perfect for use with these Thermo-Tec products - new Thermo-Guard FR, the Cool-It Insulating Mat and the Aluminized Heat Barrier, but you don't have to limit its use to these products!

Heavy-Duty Spray Adhesive is a fast-drying, quick-bonding, high temperature contact adhesive.  Use it wherever you need a secure, long-lasting, easy-to-apply bond.  It is available in a generous 16 oz. can.

PLEASE NOTE  ~ Only Ships UPS Ground ~  Only Sold in the USA

14600

The Suppressor Mat 12" x 12" (Qty 2)

Retail Price: $14.48

Your Cost: $12.78

14600-12

The Suppressor Mat 12" x 33.5 ft

Retail Price: $242.48